Report a Problem:
Phone: 503-725-5420
Location: FAB 82-01
Home Students Fac/Staff CS Tutors Guidelines Windows Linux Mac Mail Network Software Web TheCAT Sitemap Contact
arrowHome Saturday, 19 August 2017  
Wireless Guide Print
Written by Administrator   
Tuesday, 13 September 2005
HTML Source EditorWord wrap

Getting Started
Linux and Wireless
Accessing CECS Resources

As part of a joint project between OIT and theCAT, access points have been placed at strategic points on the PSU campus, creating a the wireless network known as PSU General Access

OIT has step by step procedures for connecting to wireless from different operating system.


I. Getting Started

So you want to use Wireless? You'll need to obtain a wireless network card. Most new laptops will come with wireless cards built in. If you are using such a laptop, chances are it will work with the "PSU" wireless network.  If you are purchasing a USB wireless adapter, you'll want to make sure it supports 802.11n for best connectivity on our network.  

For most operating systems, you'll simply need to walk into an area with wireless coverage, and everything will work. If this is not the case, you'll need to explicitly tell your computer to connect to the right network. That is: PSU In windows, you should just be able to click on PSU  under "view available wireless connections." In linux/BSD you'll probably need to use iwconfig/ifconfig. Check the manpage for how to specify the ESSID (it varies).

Wireless registration is no longer required. Open a web browser and you will be prompted for a login and password.

You must use your Odin login and password

Once you have logged in, you will need to leave the little window around; however, you can minimize it if you want to.

Note: if your browser blocks popups you will either need to turn popup blocking off, or tell your browser to ignore popups from .

Alternatively, you can simply connect to the VPN instead of logging in via the website.  Once you connect to the VPN, you can also access file servers and printers shared via windows servers. See for more information.

Now, if you are faculty/staff and you've got a guest here at Portland State who'd like to use PSU General Access, follow the instructions at: .


Linux and Wireless


Modern kernels should support most USB wireless dongles/adapters out of the box, so much of the following is not needed anymore. Depending on chipset, some adapters will require additional software to be installed. Please refer to the manufacture's website for more information.

This document is intended for people needing or interested in knowing how to configure a Linux-2.4.x kernel for wireless support, and how to get a kernel to work with the external PCMCIA Card Services package maintained by David Hinds at in unison with the wireless-tools package by Jeane Toureilles at . This document assumes familiarity with installation procedures for user compiled code ( i.e. INSTALL/README, configure, and make ).

Getting Started

Hopefully this doesn't need to be said, but all installation must be done as root. If you do not have access to the root account for your box, contact the administrator for your machine for assistance.

You will need access to the linux kernel sources. In addition you will need to have access to the pcmcia-cs ( if you do not want to use the kernel drivers for your pcmcia devices ) and wireless-tools sources.

Begin by configuring your kernel ( if you have built a kernel in this directory before, I encourage you to do a 'make mrproper' prior to beginning. Just save your old .config file to a different name, if you want to preserve your old setup, then load the config once you've gotten into the configuration process. )

I. What to do if you don't want to use the kernel drivers

Under 'General Setup->PCMCIA/Cardbus support' turn OFF all options. This is required to get the pcmcia-cs sources to build the necessary modules. Then under 'Networking->Wireless Lan (not radio)' turn ON only the option 'Wireless Lan (non-hamradio)'. This provides the configuration information needed by the wireless-tools package. Thats it as far as kernel configuration requirements for wireless card use.

II. What to do if you DO want to use the kernel drivers

If this is your condition you are limited to the wireless drivers provided in the kernel. There is nothing special to do to get the card working under this configuration choice other than selecting the proper drivers in the kernel. You're done.

--adamaig,-new-2013-version-2.html Accessing CECS Resources

In order to access CECS resources you will need to use our vpn, see for windows. for linux.

Last Updated ( Tuesday, 02 May 2017 )

©1999 - 2017 TheCAT